OK – An ICC Elite Installer located in Tulsa, Oklahoma, was awarded a data cabling contract. The project required a Category 6 (CAT 6) and fiber optic structured cabling system.
The project required an installation of 926 CAT 6 drops, where the Elite Installer pulled 55,000 feet of 500 MHz CAT 6 bulk cable. The horizontal cross-connect consisted of blank patch panels configured with high-density (HD) CAT 6 RJ45 keystone jacks. At the outlets, Stainless steel faceplates were installed and configured with HD CAT 6 jacks.
In addition, the fiber optic system required an installation of 18 fiber optic drops. Three Classic 1 RMS fiber optic rack mount enclosures were loaded with LGX®-compatible Classic LC-LC fiber optic adapter panels with aqua multimode adapters.
The cabling systems were mounted onto two seven-foot four-post distribution racks and a wall mount rack. A ten-foot ladder rack cable runway supported bulk cable running overhead and distribution from the equipment room entry/exit point to cross-connects on the racks.
After the installation, the system’s CAT 6 permanent link was tested and passed the TIA® spec.
To become an ICC Elite Installer or Certified Elite Installer, please visit icc.com/elite.
