Success Stories

CA – An ICC Elite Installer located in Riverside, California, was awarded a project to install an ICC Category 6 (CAT6) structured cabling system into a highly rated, public high school. The school wanted the cabling system to support high-speed Gigabit Ethernet bandwidth. The cabling system was installed and tested to the TIA permanent link spec. The Elite Installer pulled …

NV – An ICC Elite Installer located in Las Vegas, Nevada, was awarded a project for a multinational automotive manufacturer’s dealership. The requirement was to install an ICC Category 6 (CAT6) structured cabling system to permanent link spec. The project required pulling 30,000 feet of CAT6 plenum cable. In the telecom room, the installer mounted 24 and 48 port CAT6 …

IA – An Elite Installer located in Davenport, IA won a project from a convenience store chain with 500 locations. The project required to upgrade their structured cabling systems to support faster voice and data communications between network equipment and devices. The installer used a combination of Category 6 cable and Category 5e cable. They used blue and gray to …

WI – An Elite Installer located in Menomonie, WI, won a project to install an ICC structured cabling system into a newly constructed building. The system was required to support network equipment and devices with high-speed 10 Gigabit Ethernet performance. The installer elected to choose Category 6A (CAT6A) and fiber optic cables and connectivity. The installer pulled 75,000 feet of …

OH – An ICC Certified Elite Installer located in New York won a project to install an ICC structured cabling system for a major hotel in Madison, Ohio. The 54,000-square-foot hotel occupied two acres and featured an indoor pool, fitness center, meeting room, and 80 guest rooms. The cabling system was installed as a channel link using 96,000 feet of …

IA – An ICC Certified Elite Installer located in Iowa was hired by a major hotel to install an ICC structured cabling system. From the telecom room to the guest services counter and the guests’ rooms, the installer pulled 100,000 feet of CAT6 cable and installed over 400 CAT6 drops. To support data transmission over long distances, they added an …

NC – An ICC Elite Installer located in North Carolina won a project to install an ICC structured cabling system. The project required data, voice, and fiber optic connectivity. However, one component that made this project unique was the number of data drops that were installed in the telecommunications room. 3200 RJ-45 CAT6 jacks were terminated and installed into blank …

FL – A multinational hospitality company wanted to dramatically improve network services for hotel guests. They hired an ICC Certified Elite Installer (CEI) to install two structured cabling systems, Category 6 (CAT6) and fiber optic. The project required two CAT6 Ethernet ports in every guestroom to allow devices to be plugged in and accessible to Gigabit Ethernet bandwidth. A Passive …

UT – A software company in Utah hired an ICC Certified Elite Installer to install a structured cabling system that could support Category 6 (CAT6) Gigabit Ethernet (1GbE) and fiber optic 10 Gigabit Ethernet (10GbE) bandwidths. The project site was a call center, a centralized office for receiving or transmitting a large volume of telephone calls. The installer pulled 84,000 feet …

WI – An Elite Installer located in Wisconsin was hired to install a Category 6A (CAT6A) structured cabling system. Desktop applications required the system to support 10-Gigabit Ethernet (10GbE). The installer recommended running CAT6A straight to the desktop. A seven-foot distribution rack was installed in the telecommunications room. The installer elected to mount modular blank patch panels to the rack …

FL – An ICC Elite Installer located in Jacksonville, Florida was hired to install a Category 5e (CAT5e) structured cabling system. The project site was a multi-story building. Multiple telecom rooms were available on each level to provide connectivity to different offices. Wall mount racks were installed into the rooms and mounted with CAT5e 24-Port patch panels. The installer decided …

IA – An ICC Elite Installer located in Iowa was recently hired to install a voice and data cabling system. 55,000 feet of Category 5e (CAT5e) riser-rated cable was pulled, in addition to 5,000 feet of plenum-rated cable. The telecom closet consisted of two CAT5e 48-port patch panels installed on hinged wall mount brackets. To support connectivity to the phone …

CO – An ICC Elite Installer based in Colorado was hired to install a Category 6 structured cabling system. In addition to installing 1200 CAT6 data drops, they pulled 96,000 feet of Category 6 bulk cable. The best part, the cable did not kink or tangle. ICC’s CAT6 cable is packaged using REELEX II™ technology, a patented method of winding …

NE – An internet service provider near Aurora, Nebraska, wanted to modernize their communication system to provide better technology services. They hired an ICC Elite Installer who pulled 33,000 feet of CAT6 bulk cable for the entire installation. The installer built their patch panels using 48 port high density (HD) blank panels and configured them with 300 CAT6 RJ45 HD keystone …

AL – An Elite Installer based in Alabama was hired to install a data cabling system. The project started with 30,000 feet of CAT6 cable with 23AWG being pulled. The sequential footage markings on the outside jacket made measuring the cable simple while the REELEX® pull box made running cable to the work areas stress-free. 48-port HD patch panels were …

TX – An ICC Elite Installer, located in Texas, was hired to expand an existing structured cabling system that supported Gigabit Ethernet applications. Using CAT6 bulk cable with 23 AWG solid wires, they were able to achieve their desired results. With the convenient pull box design, dispensing 74,000 feet of CAT6 UTP cable from the data room was a simple …

TX – An ICC Certified Elite Installer based out of Corpus Christi, Texas, that specializes in low-voltage cabling was hired to install an ICC structured cabling system. The project called for 400 data drops to run from the telecommunication room (TR) to the work area (WA). The network required a cabling system to support Gigabit Ethernet, so the installer recommended …

NC – An ICC Elite Installer located near Knightdale, North Carolina, was hired to install an ICC structured cabling system.  The project called for 312 Category 6 (CAT6) data drops to run from the equipment room to the work areas. Common project materials such as faceplates, keystone jacks, J-Hooks, and others were used for the installation. However, the installer decided …

AZ – A top performing financial and insurance company outside Phoenix, AZ, needed to update their company’s voice and data applications expeditiously. The company started by updating the telecoms room. Using an ICC Elite Installer, they were able to incorporate ICC’s 48-port HD blank patch panels along with a 2-post distribution rack. This allowed for a simple installation as well …

NM – A memorial hospital outside Deming, New Mexico, hired an ICC Elite Installer to upgrade their structured cabling system. After evaluating how to improve the bandwidth for their data security applications, the installer recommended adding 144 Category 6 data drops. Due to limited space in the telecommunications room, the Elite Installer recommended installing a wall mount rack. The installer …