Success Stories

FL – An ICC Elite Installer located in Jacksonville, Florida was hired to install a Category 5e (CAT5e) structured cabling system. The project site was a multi-story building. Multiple telecom rooms were available on each level to provide connectivity to different offices. Wall mount racks were installed into the rooms and mounted with CAT5e 24-Port patch panels. The installer decided …

IA – An ICC Elite Installer located in Iowa was recently hired to install a voice and data cabling system. 55,000 feet of Category 5e (CAT5e) riser-rated cable was pulled, in addition to 5,000 feet of plenum-rated cable. The telecom closet consisted of two CAT5e 48-port patch panels installed on hinged wall mount brackets. To support connectivity to the phone …

CO – An ICC Elite Installer based in Colorado was hired to install a Category 6 structured cabling system. In addition to installing 1200 CAT6 data drops, they pulled 96,000 feet of Category 6 bulk cable. The best part, the cable did not kink or tangle. ICC’s CAT6 cable is packaged using REELEX II™ technology, a patented method of winding …

NE – An internet service provider near Aurora, Nebraska, wanted to modernize their communication system to provide better technology services. They hired an ICC Elite Installer who pulled 33,000 feet of CAT6 bulk cable for the entire installation. The installer built their patch panels using 48 port high density (HD) blank panels and configured them with 300 CAT6 RJ45 HD keystone …

AL – An Elite Installer based in Alabama was hired to install a data cabling system. The project started with 30,000 feet of CAT6 cable with 23AWG being pulled. The sequential footage markings on the outside jacket made measuring the cable simple while the REELEX® pull box made running cable to the work areas stress-free. 48-port HD patch panels were …

TX – An ICC Elite Installer, located in Texas, was hired to expand an existing structured cabling system that supported Gigabit Ethernet applications. Using CAT6 bulk cable with 23 AWG solid wires, they were able to achieve their desired results. With the convenient pull box design, dispensing 74,000 feet of CAT6 UTP cable from the data room was a simple …

TX – An ICC Certified Elite Installer based out of Corpus Christi, Texas, that specializes in low-voltage cabling was hired to install an ICC structured cabling system. The project called for 400 data drops to run from the telecommunication room (TR) to the work area (WA). The network required a cabling system to support Gigabit Ethernet, so the installer recommended …

NC – An ICC Elite Installer located near Knightdale, North Carolina, was hired to install an ICC structured cabling system.  The project called for 312 Category 6 (CAT6) data drops to run from the equipment room to the work areas. Common project materials such as faceplates, keystone jacks, J-Hooks, and others were used for the installation. However, the installer decided …

AZ – A top performing financial and insurance company outside Phoenix, AZ, needed to update their company’s voice and data applications expeditiously. The company started by updating the telecoms room. Using an ICC Elite Installer, they were able to incorporate ICC’s 48-port HD blank patch panels along with a 2-post distribution rack. This allowed for a simple installation as well …

NM – A memorial hospital outside Deming, New Mexico, hired an ICC Elite Installer to upgrade their structured cabling system. After evaluating how to improve the bandwidth for their data security applications, the installer recommended adding 144 Category 6 data drops. Due to limited space in the telecommunications room, the Elite Installer recommended installing a wall mount rack. The installer …

TX – A company outside Corpus Christi, Texas, hired an ICC Elite Installer to help upgrade their network. The project required an increase of 240 Category 5e data ports for supporting a 1G Base-T bandwidth. Due to the limited space in the telecom room, the Elite Installer recommended installing a wall mount rack. They also suggested configuring blank patch panels …

CA – A newly constructed resort near Napa, California, hired an ICC Elite Installer to upgrade their structured cabling system. The project required expanding the number of workstations and increasing bandwidth for their specific applications. The installer recommended adding more than 300 Category 6 (CAT6) data drops as well as adding twelve 10G multimode and twenty-four singlemode fiber drops. In …

UT – A leading national distributor located near Salt Lake City, Utah, desired to improve the bandwidth of their voice, data, and video network. They hired an ICC Elite Installer to review their existing setup and propose a solution. The installer recommended upgrading the entire structured cabling system to Category 6A (CAT6A) performance. After incorporating ICC’s CAT6A UTP solid cables …

MA – A nationally recognized voice, data, video, and security company based outside Maine, Massachusetts, was hired to install an ICC structured cabling system. The company was able to improve the existing set up using CAT6e bulk cable with 48-port CAT6 patch panels along with fiber optic enclosures with LC-LC 10G multimode LGX adapter panels. They were able to measure …

NY – Sixty-two residences in New York City, had ICC’s wiring enclosures installed into their homes.  They elected to hire an ICC Elite Installer to wire phone, CAT6 data, and video connectivity throughout the complex. Fifty 14-inch enclosures and twelve 9-inch enclosures were installed altogether. 24,000 feet of CAT6 cable was pulled to help facilitate the connection between the enclosures …

TX – A government agency in Fort Worth Texas, elected to use ICC products to streamline the security applications in their facility. With the help of an ICC Elite Installer™, they opted for a Category 6 structured cabling system. Pulling cable was made easy due to the CAT6 system design which included REELEX II™ and tangle-free winding while being conveniently …

NE – A school district in Lincoln, Nebraska saw the opportunity to upgrade their network cabling system during a renovation. They hired an ICC Certified Elite Installer (CEI) who recommended Category 6 (CAT6). CAT6 can support Gigabit Ethernet which is enough bandwidth for students and administrative staff. The CEI installed over 400 data drops and pulled 45,000 feet of ICC …

AZ – A school district located near Hot Springs, Arizona hired an ICC Certified Elite Installer TM (CEI) to upgrade their structured cabling system to support 10GbE network applications. ICC Category 6A (CAT6A) rated cable and connectivity was recommended for the system. 240 drops were installed between the work area and telecommunication room. Over 54,000 feet of ICC CAT6A Riser …

NV – A law firm located in Las Vegas, NV, hired an ICC Certified Elite InstallerTM (CEI) to expand their network. After reviewing the firm’s operating systems, the installer recommended a Category 6 (CAT6) structured cabling system. ICC’s CAT6 cabling system has been factory tested and certified up to 7.6dB NEXT headroom when installed per TIA® specification. The system can …

NC – A major hotel located near Clemmons, NC recently hired an ICC Elite Installer for a project that required upgrading the hotels structured cabling system to Category 6 performance. The installer pulled over 200,000 feet of riser cable in four colors for each level of the hotel. The REELEX II tangle-free coiling, and big payout tube pull box design …