TN – An ICC Elite Installer located in Tennessee was awarded a data cabling contract for an RV resort and lodge. The project required a Category 6 (CAT 6) structured cabling system.
The project required an installation of around 4400 CAT 6 drops, where the Elite Installer pulled 50,000 feet of 500 MHz CAT 6 bulk cable with 23 AWG UTP solid wires and CMR jacket. The horizontal cross-connect consisted of fifty 24-port blank patch panels in 1 RMS configured with RJ45 CAT 6 keystone connectors in EZ style. At the outlets, surface mount boxes were installed and configured with CAT 6 connectors.
The cabling system was supported with 2-post distribution racks in 45 and 24 RMS, wall mount racks in 15 RMS, and wall mount utility racks in 5 RMS. 600 feet of cable raceway section in a 120-foot bulk pack and raceway fittings were used to route cable.
After the installation, the system’s permanent link was tested and passed the TIA® spec.
To become an ICC Elite Installer or Certified Elite Installer, please visit icc.com/elite