Features
- NATIONAL ELECTRICAL CODE (NEC) COMPLIANT: Built with 100% stranded pure bare copper conductors, meeting NEC Section 800.179, which mandates that “Conductors in communications cables, other than coaxial, shall be copper.” Rated for 75°C and 300V, CAT6 patch cables support stable network communications while reducing fire hazards
- PoE++ TYPE 4 RATED PATCH CABLE: This CAT6 Ethernet patch cable is built with stranded 24 AWG pure copper conductors and supports Power over Ethernet (PoE++) Type 4 up to 100W, suitable for IP cameras, wireless access points, and other high-power network devices. Supports up to 250 MHz performance and is ETL and UL listed for safety and compliance
- DATA CENTER GRADE PERFORMANCE: CAT6 patch cables are wired to T568B and factory tested to meet TIA performance standards, supporting 10/100/1000 Mbps Gigabit Ethernet with bandwidth up to 250 MHz for structured cabling environments
- 50 MICRO-INCH GOLD-PLATED CONTACTS: Contacts are plated with 50 micro-inches of gold over phosphor bronze to resist corrosion and support repeated plug-to-jack insertion cycles
- CLEAR BOOT WITH CLIP PROTECTION: Transparent boot provides a uniform look with the modular plug, prevents snagging on adjacent cables, and limits over-bending at the connector
- INDOOR USE: Designed for indoor network installations using PVC jacket material. Not intended for outdoor or direct burial applications
Specifications
Electrical/Physical:
Cable:
Operating Temperature -20°C to 80°C
Velocity of Proportion NOM 67%
Capacitance, Mutual 14.5 PF/FT at 1 MHz
Dielectric withstands, min 1500V RMS
D.C Resistance, max 93.2 ohms/km at 20°C
Impedance, Characteristic, NOM 100.0 OHMS
±15 at 1 to 100 MHz
±20 at 100 to 350 MHz
Modular Plug:
UL Applications: 250 Volts max, at 2 AMPS
Resistance of Insulation: 500 Megaohms
Resistance of Termination: 35 Milliohms max at -40°C to -70°C
Dielectric Withstanding Voltage: 500 Volts AC
Material and Finish:
Cable: CAT6 Patch Cable
Jacket: Material: PVC
Overall Diameter: 0.250″ max
Average Thickness: 0.020″
Insulation: Material: High-Density Polyethylene
Overall Diameter: 0.038″
Average Thickness: 0.007″
Conductor: 24 AWG (7×32) UL Rated, Bare Copper Wire, Stranded
Performance Rating: CAT6
Modular Plug with Loading Bar: UL and cUL Recognized
Housing: Polycarbonate, UL 94V-0
Color: Clear
Contact: Phosphor Bronze, 0.014 inch thick
Gold Plating: 1.27 microns/50 micro inch min on contacts
No. of contacts: 8
Strain Relief Boot:
Material: 70P PVC
Mechanical:
Cable to Plug Tensile strength: 20 lbs (89N) min
Durability: 200 mating cycles min
Color:
Color XX: BK-Black, BL-Blue, GN-Green, GY-Gray, OR-Orange, RD-Red, WH-White & YL-Yellow
