Oversized Faceplate IDC RJ-45 CAT5e Data F-type ICRDS0FLWH
Oversized Faceplate IDC RJ-45 CAT5e Data F-type ICRDS0FLWH
Oversized Faceplate IDC RJ-45 CAT5e Data F-type Back ICRDS0FLWH
Oversized Faceplate IDC RJ-45 CAT5e Data F-type Side ICRDS0FLWH

Oversized Faceplate IDC with RJ-45 CAT5e Data and F-Type in White

Discontinued – Inventory is limited

Pre-configuration: Oversized IDC Termination - CAT5e and F-Type
  • Faceplate IDC RJ-45 CAT5e Data F-type ICRDS0F5WH
  • Faceplate IDC RJ-11 6P6C RJ-45 Cat5e Data ICRDSV05WH
  • Faceplate IDC RJ-11 6P6C RJ-45 CAT5e Data F-Type ICRDSVF5WH
  • Oversized Faceplate IDC RJ-45 CAT5e Data F-type ICRDS0FLWH
  • Faceplate F-Type IC630EG0WH
  • Faceplate 6P6C Screw Terminals IC630E60WH
  • Faceplate 2 6P6C Screw Terminals IC630E66IV
  • Faceplate 6P6C Screw Terminals F-Type IC630E6GWH
  • Telephone Faceplate 6P6C IC630DB6WH
  • Telephone Faceplate Stainless Steel 6P6C IC630DA6SS

In stock

SKU: ICRDS0FLWH Categories: , ,
UPC: 633758093217

Country of Origin (subject to change): Taiwan

Warning SymbolCalifornia Prop 65 Warning


ICC oversized integrated faceplate is designed to help cover uneven and jagged drywall cuts. The oversized faceplate meets the ANSI/TIA 570-C Residential Telecommunications Infrastructure Standard recommendation that for each Grade 1 cabled location, a minimum of one 4-pair Category 5e or higher rate balanced twisted-pair channel and one 75-ohm coaxial channel shall be available to each outlet. Grade 1 cabled location provides a generic cabling system that meets the minimum requirements for basic telecommunications services such as data and community antenna television (CATV).

This oversized faceplate consists of one integrated CAT5e data port with 110 punch down termination and one 3GHz Gigahertz F-Type coax port. The standard recommends one of these types of wall plates installed in every room of a residence.


  • Provides an integrated one-piece solution for CAT5e data, and video applications
  • CAT5e port supports Power over Ethernet (PoE++) Type 4; up to 100 Watts
  • IDC (insulation displacement connection) contacts are designed for repeated 110 terminations providing long-lasting performance and reliability
  • 3GHz Nickel Plated F-Type connector for improved performance with superior signal quality with minimal noise
  • Quick and easy installation with integrated color-coded wiring diagrams requiring no additional assembly
  • Embossed port labels to eliminate the need for additional labeling or identification creating a cleaner appearance
  • Rugged and durable construction
  • Includes IDC caps to ensure the terminated wiring is secure
  • ANSI/TIA-568-C and UL 1863 compliant
  • Designed to cover uneven and oversized drywall cuts


Material: ABS, UL 94V-0

Finish: Texture

Color: WH-White